Вы здесь

Funct. Mater. 2017; 24 (3): 496-500.

doi:https://doi.org/10.15407/fm24.03.496

Sensitivity analysis and proportioning design of rock burst similar materials

Yongsheng Liu1, Jin Li1, Qiulan Wu1, Wang Liu2

1 School of Civil Engineering and Architecture, East China Jiaotong University, Nanchang 330013, China
2 Nanchang Municipal Public Investment Group Co., Ltd.Nanchang 330029, China

Abstract: 

The rock burst similar material were prepared by quadratic orthogonal design. Sand ratio (A), cement plaster ratio (B), watered rate (C) are used as the level influence factors, and the uniaxial compressive strength C, the ratio of compressive and tensile strength and the impact energy index was used as assessment index. The sensitivity of the influence factors to the rock burst tendency of similar materials was studied by the range analysis method. The results showed that: sand ratio (A) is the main influence factors to the compressive strength of rock burst material; the ratio of water (C) is the main influence factor to the compressive and tensile strength ratio; cement gypsum ratio (B) is the main influence factor to impact energy index.

Keywords: 
rock burst; similar material; orthogonal design; sensitivity; proportioning test
References: 

1. Pan Yi Shan, Zhang Mengtao, Wang Laigui et al. J. Geotechn. Eng., 4, 49, 1997

2. Qian Qi Hu., Rock Soil Mech., 35 (1), 1, 2014.

3. Y.R. Stagey, Proceedings of the First International Conference on Rock Dynamics and Applications. Lausanne, CRC Press, 57, 2013.

4. Chen Zongji, Chinese J. Rock Mech. Eng., 6 (1),1, 1987.

5. Manchao He, Miao Jinli, Li Dejian et al. CChinese J. Rock Mech. Eng., 26 (5), 865, 2007.

6. Yang Shuqing, Eng. J. Wuhan Univ., 6 (2), 160, 1993.

7. Chen Wentao, Song Chunming, Cheng Tingting et al. Exp. Mech., 27 (5), 630, 2012,.

8. Li Tianbin, Wang Xiangfeng, Meng Lubo, Chinese J. Rock Mech. Eng., S1,2610 2011.

9. Liu Ruijiang, Zhang Yewang, Wen Chongwei et al., Exp.Techn. Manag., 9, 52, 2010.

Current number: