Funct. Mater. 2019; 26 (1): 182-188.

doi:https://doi.org/10.15407/fm26.01.182

Protective impact resistant composite materials based on aluminium-silicate glass-ceramics

O.V.Savvova, G.K.Voronov, O.V.Babich, V.L.Topchiy, O.I.Fesenko, V.D.Tymofieiev

National Technical University &qout;Kharkiv Polytechnic Institute&qout;, 2 Kyrpychova Str., 61002 Kharkiv, Ukraine

Abstract: 

Protective impact-resistant composite materials have been synthesized and the perspectivity of their use as part of impact-resistant structures has been established. Were developed composite materials based on aluminium-silicate glass-ceramic materials and fillers - silicon carbide and zirconium oxide stabilized with yttrium oxide. Are established the effect of the type and content of fillers on the formation of the structure of glass-ceramic materials in correlation with their strength properties. Were obtained the samples of impact-resistant composite materials with high performance properties based on high-strength aluminium-silicate glass-ceramics in conditions of low-temperature two-stage heat treatment, which can be used as a basis for the development of protective structure elements.

Keywords: 
aluminium-silicate glass-ceramic materials, zirconium dioxide, silicon carbide, two-stage heat treatment, impact-resistant.
References: 

1. Ian G.Crouch, The Science of Armour Materials, Woodhead Publishing, Duxford (2016). https://doi.org/10.1016/B978-0-08-100704-4.00001-3

2. S.V.Zhitnyuk, A.A.Evteev, G.V.Polatov et al., Adv. Chem. Chem. Techn., 28, 157 (2014).

3. R.F. Patent 2169712 (2001).

4. U.S. Patent 7465687 (2015).

5. V.M.F.Marques, D.U.Tulyaganov, S.Agatho-poulos et al., J. Eur. Ceram. Soc., 26, 2503 (2006). https://doi.org/10.1016/j.jeurceramsoc.2005.07.055

6. V.A.Rozenenkova, S.S.Solntsev, Nina Mironova-Ulmane, S.V.Gavrilov, Glass Ceram., 73, 26 (2017). https://doi.org/10.1007/s10717-017-9894-3

7. L.R.Vishnyakov, A.V.Mazna, A.V.Neshpor, V.A.Kokhanii, Strength Mater., 6, 152 (2004).

8. M.Nader, F.Aldinger, M.J.Hoffmann, J. Mater. Sci., 34, 1197 (1999). https://doi.org/10.1023/A:1004552704872

9. K.A.Weidenmann, G.Rixecker, F.Aldinger, J. Eur. Ceram. Soc., 26, 2453 (2006). https://doi.org/10.1016/j.jeurceramsoc.2005.05.015

10. R.Yilmaz, R.Taylor, J. Mater. Scie., 42, 763 (2007). https://doi.org/10.1007/s10853-006-1443-3

11. O.Savvova, O.Babich, G.Voronov, S.Ryabinin, Strength Mater., 3, 167 ( 2017).

12. Canter C.Barry, Ceramic Materials: Science and Springer, New York (2007).

13. O.Savvova, L.Bragina, G.Voronov et al., Chem.Chem. Techn., 11, 214 (2017). https://doi.org/10.23939/chcht11.02.214

14. O.V.Savvova, S.M Logvinckov, O.V.Babich, A.R.Zdoric, The Issues Chem. Chem. Techn., 3, 96 (2018)

.

Current number: