Funct. Mater. 2022; 29 (3): 377-380.

doi:https://doi.org/10.15407/fm29.03.377

Influence of the rhenium alloying on the wear resistance of Co-NbC, Ni-NbC eutectic alloys in high-temperature fretting-wear conditions

O.I.Dukhota1, T.S.Cherepova2, M.V.Kindrachuk1, G.P.Dmitrieva2, V.O.Maksymov1, A.O.Yurchuk1, V.E.Marchuk1, V.V.Kharchenko1

1National Aviation University, 1 Liubomyra Guzara Ave., 03058 Kyiv, Ukraine 2G.V.Kurdyumov Institute for Metal Physics, National Academy of Sciences of Ukraine, 36 Academician Vernadsky Boulevard, 03142 Kyiv, Ukraine

Abstract: 

The paper presents the results of comparative tests for wear resistance under conditions of high-temperature fretting-wear of the HTN-62 industrial alloy with a standard set of alloying elements Cr, Al, W, Fe, and experimental alloys: HTN-63 (Co-NbC system) and HTN-66 of (Ni-NbC system), alloyed with 6 mass % of rhenium. A positive effect of the Re-alloying on the wear resistance of the alloys was confirmed based on the comparative tests and microtopographical examinations of friction surfaces. Furthermore, the mechanism of the positive Re-alloying on the wear resistance has been considered.

Keywords: 
cobalt, nickel, rhenium, alloying, contact surfaces, wear resistance.
References: 
1. V.A.Boguslaev, L.Y.Ivshchenko, A.Y.Cogan, V.F.Mozgovoy, Contact Interaction of Conjugated Details of GTE, VAT "Motor Sich", Zaporizhzhia (2009) [in Ukrainian].
 
2. V.Marchuk, M.Kindrachuk, Y.Krysak et al., Tribol. Ind., 43, 241 (2021).
https://doi.org/10.24874/ti.1001.11.20.03
 
3. G.I.Peychev, A.K.Shourin, L.Y.Ivshchenko et al., Engine Engineering Gerald, 2, 188 (2006).
 
4. M.V.Kindrachuk, Yu.Ya.Dushek, M.V.Luchka, Poroshkovaya Metallurgiya, 9-10, 56 (1994).
 
5. M.V.Kindrachuk, Yu.Ya.Dushek, M.V.Luchka, A.N.Gladchenko, Poroshkovaya Metallurgiya, 5-6, 104 (1995).
 
6. G.P.Dmitrieva, T.S.Cherepova, Metallofiz. Noveishie Tekhnol., 35, 1383 (2013).
 
7. G.P.Dmitrieva, T.S.Cherepova, V.I.Kosorukova, V.I.Nechyporenko, Metallofiz. Noveishie Tekhnol., 37, 973 (2015).
https://doi.org/10.15407/mfint.37.07.0973
 
8. Patent of Ukraine No. 39450.
 
9. T.S.Cherepova, G.P.Dmitrieva, A.V.Nosenko, A.M.Semirga, Scien. Innov , 10, 20 (2014).
https://doi.org/10.15407/scine10.04.020
 
10. G.I.Peychev, V.E.Zamkovoi, N.V.Andreyko, Engine Engineering Gerald, 2, 123 (2009).
 
11. T.S.Cherepova, G.P.Dmitrieva, O.I.Dukhota, M.V.Kindrachuk, Mater. Sci., 52, 173 (2016).
https://doi.org/10.1007/s11003-016-9940-2
 
12. G.P.Dmitrieva, T.S.Cherepova, O.I.Dukhota, et. al Powder Metall. Met. Ceram., 56, 664 (2018).
https://doi.org/10.1007/s11106-018-9941-9
 
13. T.Cherepova, G.Dmitrieva, O.Tisov et al., Acta Mech. Autom., 13, 57 (2019).
https://doi.org/10.2478/ama-2019-0009
 
14. A.A.Dreano, S.Fouvry, G.Guillonneau, Wear, 426-427, 712 (2019).
https://doi.org/10.1016/j.wear.2019.01.023
 
15. V.Holubets, M.Pashechko, J.Borc et al., Powder Metall Met Ceram., 60, 90 (2021).
https://doi.org/10.1007/s11106-021-00218-0
 
16. J.Xie, Y.Ma, W.X.Xing et al., J. Mater. Sci., 54, 3558 (2018).
https://doi.org/10.1007/s10853-018-3081-y
 
17. T.S.Cherepova, G.P.Dmitrieva, T.V.Pryadko et al., Funct. Mater., 28, 69 (2021).
https://doi.org/10.15407/fm28.01.69
18. W.Xia, Zhao X., Y.Liang, Z.Zhang, J. Mater. Sci. Technol., 44, 76 (2020)19.
 
19. G.I.Morozova, O.B.Timofreeva, N.V.Petrushin, MiTOM, 6(644), 10 (2009).
 
21. V.M.Holubets, M.I.Pashechko, K.Dzedzic et al., J. Frict. Wear, 41, 443 (2020).
https://doi.org/10.3103/S1068366620050128
 
22. V.V.Shevelia, A.V.Karasiov, J. Frict. Wear, 3, 256 (1982).
 
23. O.I.Dukhota, Probl. Frict. Wear, 4, 10 (2015).
 
24. J.Benar, Oxidation of Metals, vol. 1., Theoretical Fundamentals, Metallurgia, Moscow (1968) [in Russian].
 
25. M.Pashechko, O. Tisov, Materials, 15(13), 4393 (2022)
https://doi.org/10.3390/ma15134393

Current number: