Funct. Mater. 2022; 29 (4): 537-545.
Impact of the acetone/DMSO binary solvent on porosity of epoxy polymer films
1National Technical University "Kharkiv Polytechnic Institute", 2 Kyrpychova Str., 61002 Kharkiv, Ukraine
2Institute of Chemistry, V.N.Karazin Kharkiv National University, 4 Svoboda Sq., 61022 Kharkiv, Ukraine
Effect of mixed acetone/dimethyl sulfoxide solvent composition on morphology of porous epoxy polymer films obtained by chemical solution deposition method was studied. Total and surface porosity of the polymer films as well as the size of open pores were determined using FTIR spectroscopy and SEM techniques. It was revealed that the choice of the solvent composition is a key factor affecting the porosity of the polymer films. It was shown how varying the composition of the binary acetone/dimethyl sulfoxide solvent in a wide range of concentrations affects the rheology and characteristics of the porous polymer films. The obtained results allow to influence both the overall porosity of the polymer films and the size of the formed pores.
1. B.D.Zdravkov, J.J.Cermak, M.Sefara et al., Central European Journal of Chemistry, 5, 385 (2007). https://doi.org/10.2478/s11532-007-0017-9 |
||||
2. E.P.Favvas, F.K.Katsaros, S.K.Papageorgiou et al., React. Funct. Polym., 120, 104 (2017). https://doi.org/10.1016/j.reactfunctpolym.2017.09.002 |
||||
3. H.Wang, T.Wang, S.Yang et al., Polymer, 54, 6339 (2013). https://doi.org/10.1016/j.polymer.2013.09.036 |
||||
4. A.Moslehyani, M.Mobaraki, A.F.Ismail et al., React. Funct. Polym., 95, 80 (2015). https://doi.org/10.1016/j.reactfunctpolym.2015.08.007 |
||||
5. S.Leong, A.Razmjou, K.Wang et al., Membr. Sci., 472, 167 (2014). https://doi.org/10.1016/j.memsci.2014.08.016 |
||||
6. X.Dong, D.Lu, T.A.L.Harris et al., Membranes, 11, 309 (2021). https://doi.org/10.3390/membranes11050309 |
||||
7. M.S.Park, W.Joo, J.K.Kim, Langmuir, 22, 4594 (2006). https://doi.org/10.1021/la053009t |
||||
8. R.Ulrich, H.P.Weber, Appl. Opt., 11, 428 (1972). https://doi.org/10.1364/AO.11.000428 |
||||
9. S.Yu, F.L.Ng, Kh.C.C.Ma et al., J. Appl. Polym. Sci., 127, 2641 (2012). https://doi.org/10.1002/app.37514 |
||||
10. P.O.Babatunde, N.Nanri, K.Onitsuka et al., J. Chem. Eng. Jpn., 45, 622 (2012). https://doi.org/10.1252/jcej.12we085 |
||||
11. C.Huan, C.Zhu, L.Liu et al., Front. Mater., 8, 700917 (2021) https://doi.org/10.3389/fmats.2021.700917 |
||||
12. T.M.Ermolinskaya, L.A.Fenko, A.V.Bildyukevich, Polymer Science, Ser. A, 50, 1065 (2008). https://doi.org/10.1134/S0965545X08100076 |
||||
13. J.Chen, T.Qiu, W.Yan, J. Mater. Chem. A, 8, 22657 (2020). https://doi.org/10.1039/D0TA05563H |
||||
14. M.Diaz de los Rios, E.Hernandez Ramos, SN Applied Sciences, 2, 676 (2020). https://doi.org/10.1007/s42452-020-2512-y |
||||
15. E.Stefanis, C.Panayiotou, Int. J. Thermophys., 29, 568 (2008). https://doi.org/10.1007/s10765-008-0415-z |
||||
16. D.Mishurov, O.Roshal, O.Brovko, Funct. Mater., 24, 68 (2017). https://doi.org/10.15407/fm24.01.068 |
||||
17. D.Mishurov, A.Voronkin, A.Roshal et al., Opt. Mater., 64, 166 (2017). https://doi.org/10.1016/j.optmat.2016.12.004 |
||||
18. D.A.Bernards, T.A.Desai. Soft Matter., 6, 1621 (2010). https://doi.org/10.1039/b922303g |
||||
19. W.Yan, V.K.S.Hsiao, Y.B.Zheng et al., Thin Solid Films, 517, 17994 (2009). https://doi.org/10.1016/j.tsf.2008.09.080 |
||||
20. C.M.Hansen Hansen Solubility Parameters. A Users Handbook, 2nd ed. CRC Press, Francis and Taylor group (2007). https://doi.org/10.1201/9781420006834 |
||||
21. Y.Medina Gonzalez, P.de Caro, S.Thiebaud-Roux et al., J. Solution Chem., 36, 437 (2007). https://doi.org/10.1007/s10953-007-9126-5 |
||||
22. W.Zeng,, Y.Du, Y.Xue et al., Solubility Parameters. In: Mark, J.E. (eds) Physical Properties of Polymers Handbook, Springer, New York (2007). https://doi.org/10.1007/978-0-387-69002-5_16 |
||||
23. The Official Ssite of Hansen Solubility Parameters and HSPiP Software. https://www.hansen-solubility.com/HSP-science/solvent-blends.php. |
||||
24. P.M.Pakhomov, M.N.Malanin, S.D.Khizhnyak, Polymer Science, Ser. B, 50, 155 (2008). https://doi.org/10.1134/S1560090408050126 |
||||
25. P.M.Pakhomov, E.V.Kruglova, S.D.Khizhnyak, Polymer Science, Ser. B, 42, 169 (2000). | ||||
26. P.M.Pakhomov, M.N.Malanin, E.V.Kruglova, Polymer Science, Ser. B, 43, 120 (2001). |