Funct. Mater. 2026; 33 (3): 417-434.

doi:https://doi.org/10.15407/fm33.03.417

A review on recent advances in epdm/nbr-based rubber blends: structure, properties, applications and sustainability

Fariz Amirli4, Rana Khankishiyeva2,3, Aynur Mammadova1, Maxsud Jumaniyazov5

1Azerbaijan State Oil and Industry University, Az1010, Azadlig 20, Baku, Azerbaijan
2 Institute of Physics, Ministry of Science and Education of the Republic of Azerbaijan, Baku AZ1143, Azerbaijan
3Azerbaijan University of Architecture and Construction, AZ1073, Baku, Azerbaijan
4Scientific-Research Institute «Geotechnological Problems of Oil, Gas and Chemistry», Baku, Azerbaijan
5Urgench State University, 14, Kh.Alimdjan str, 220100, Urgench city, Uzbekistan.

Abstract: 

Ethylene Propylene Diene Monomer (EPDM) and Nitrile Butadiene Rubber (NBR) are two industrially significant elastomers with complementary properties ? EPDM provides excellent resistance to ozone, weathering, and thermal aging, while NBR exhibits superior oil and hydrocarbon resistance. However, their inherent immiscibility due to polarity differences limits direct blending, leading to phase separation and poor interfacial adhesion. This review critically examines recent strategies to enhance the compatibility and performance of EPDM/NBR blends, including chemical compatibilizers such as maleic anhydride grafted EPDM (MAH-g-EPDM), epoxidized EPDM (Ep-EPDM), aminated Ep-EPDM (Am-Ep-EPDM), and bromobutyl rubber (BIIR). Nanofiller incorporation, particularly organo-modified nanoclays, improves morphology control, crosslinking density, thermal stability, and mechanical reinforcement. Fiber reinforcement, especially with short aramid fibers at optimized orientation angles, enhances ablation resistance and char layer integrity for high-temperature applications. The effects of different curing systems (sulfur vs. peroxide) on vulcanization kinetics, network structure, and long-term aging are also discussed. The review summarizes findings from multiple studies to provide a comprehensive understanding of the structure–property relationships, thermal and mechanical performance, and application-specific suitability of EPDM/NBR composites. These multifunctional blends demonstrate significant potential for automotive, aerospace, and industrial applications where a combination of oil resistance, thermal stability and durability is required. Future research directions include eco-friendly compatibilization, advanced nanofillers, digital process control, and sustainable recycling strategies to further enhance performance and eco-compatibility.

Keywords: 
EPDM, NBR, rubber blends, polymer composites, thermal stability, mechanical properties, thermal stability
References: 

1. Ning N., Ma Q., Zhang Y., Zhang L., Wu H., Tian M., Polym. Degrad. Stab. 102, 1–8 (2014). https://doi.org/10.1016/j.polymdegradstab.2014.01.037

2. Botros S. H., Tawfic M. L., Polym.-Plast. Technol. Eng. 44, 209–227 (2005). https://doi.org/10.1081/PTE-200048518

3. Botros S. H., Tawfic M. L., J. Elastomers Plast. 38, 349–365 (2006). https://doi.org/10.1177/0095244306065889

4. Manoj K. C., Unnikrishnan G., J. Appl. Polym. Sci. 105, 908–914 (2007). https://doi.org/10.1002/app.26135

5. Manoj K. C., Prajitha Kumari, Unnikrishnan G., J. Appl. Polym. Sci. 120, 2654–2662 (2011). https://doi.org/10.1002/app.33476

6. Basha S. K. T., Divya R., Menon A. U., Ashok N., Balachandran M., Mater. Today Proc. 5, 23586–23595 (2018). https://doi.org/10.1016/j.matpr.2018.10.147

7. Gao G., Zhang Z., Zheng Y., Jin Z., Polym. Compos. 31, 1223–1231 (2010). https://doi.org/10.1002/pc.20909

8. Oliveira M. G., Gomes A. C. O., Almeida M. S. M., Soares B. G., Macromol. Chem. Phys. 205, 465–475 (2004). https://doi.org/10.1002/macp.200300028

9. Ghassemieh E., Polym. Compos. 30, 1657–1667 (2009). https://doi.org/10.1002/pc.20810

10. Ersali M., Fazeli N., Naderi G., Int. Polym. Process. 27, 187–195 (2012). https://doi.org/10.3139/217.2464

11. Samaržija-Jovanović S., Jovanović V., Marković G., Konstantinović S., Marinović-Cincović M., Compos. B Eng. 42, 1244–1250 (2011). https://doi.org/10.1016/j.compositesb.2011.02.008

12. Jovanović V., Samaržija-Jovanović S., Budinski-Simendić J., Marković G., Marinović-Cincović M., Compos. B Eng. 45, 333–340 (2013). https://doi.org/10.1016/j.compositesb.2012.05.020

13. Hoikkanen M., Poikelispää M., Das A., Honkanen M., Dierkes W., Vuorinen J., Polym.-Plast. Technol. Eng. 54, 402–410 (2015). https://doi.org/10.1080/03602559.2014.958775

14. Mayasari H. E., Setyorini I., Yuniari A., Indones. J. Chem. 19, 106–114 (2019). https://doi.org/10.22146/ijc.27730

15. Mayasari H. E., Setyadewi N. M., AIP Conf. Proc. 2049, 020042 (2018). https://doi.org/10.1063/1.5082447

16. Mayasari H. E., Wirapraja A. Y., Setyorini I., Majalah Kulit Karet dan Plastik 36, 1–8 (2020). https://doi.org/10.20543/mkkp.v36i1.5951

17. Dijkhuis K. A. J., Noordermeer J. W. M., Dierkes W. K., Eur. Polym. J. 45, 3302–3312 (2009). https://doi.org/10.1016/j.eurpolymj.2009.06.029

18. Grigoryeva O., Karger-Kocsis J., Eur. Polym. J. 36, 1419–1427 (2000).

19. Ismail H., Pasbakhsh P., Ahmad Fauzi M. N., Abu Bakar A., Polym. Test. 27, 841–850 (2008).

20. Ismail H., Shaari S. M., Polym. Test. 29, 872–878 (2010).

21. Manjhi S., Sarkhel G., J. Appl. Polym. Sci. 119, 2268–2274 (2011).

22. Mohammadpour Y., Katbab A. A., J. Appl. Polym. Sci. 106, 4209–4218 (2007).

23. Pasbakhsh P., Ismail H., Ahmad Fauzi M. N., Abu Bakar A., Polym. Test. 28, 548–559 (2009).

24. Alipour A., Naderi G., Bakhshandeh G. R., Vali H., Shokoohi S., Int. Polym. Process. 26, 48–55 (2011).

25. Chakrit S., Sauvarop L., Jarunee T., J. Appl. Polym. Sci. 89, 1156–1163 (2003).

26. Hu G., Wang B., Zhou X., Mater. Lett. 58, 3457–3460 (2004).

27. Paran S. M. R., Naderi G., Mirzaee M., Ghoreishy M. H. R., Włoch M., Esmaeili A., Abida O., Saeb M. R., Polym. Bull. 81, 755–772 (2024). https://doi.org/10.1007/s00289-023-04723-7

28. Dhanasekar S., Baskar S., Vishvanathperumal S., J. Inorg. Organomet. Polym. Mater. 33, 3208–3220 (2023). https://doi.org/10.1007/s10904-023-02754-1

29. Sundar R., Mohan S. K., Vishvanathperumal S., Polymer Korea 46, 728–743 (2022). https://doi.org/10.7317/pk.2022.46.6.728

30. Das R. K., Ragupathy K., Kumar T. S., Vishvanathperumal S., Polymer Korea 47, 221–232 (2023). https://doi.org/10.7317/pk.2023.47.2.221

31. Eissa M. M., Botros S. H., Diab M. A., Shafik E. S., Rozik N. N., Clean Technol. Environ. Policy 25, 3203–3218 (2023). https://doi.org/10.1007/s10098-023-02604-1

32. Parthasarathy K., Vishvanathperumal S., Balasubramanian T., Kargil Jove Anirudh R. R., AIP Conf. Proc. 3037, 020044 (2024). https://doi.org/10.1063/5.0196573

33. Egorov E., Turmanov R., Zhapparbergenov R., Oryngaliyev A., Akylbekov N., Appazov N., Loshachenko A., Glukhoedov N., Nakyp A., Semenova N., Polymers 18, 103 (2026). https://doi.org/10.3390/polym18010103

34. Costa N. L., Hiranobe C. T., Cardim H. P., et al., Polymers 16, 1720 (2024). https://doi.org/10.3390/polym16121720

35. Li Z., Chen Z., Sun W., Liu Y., et al., Polymers 16, 2381 (2024). https://doi.org/10.3390/polym16162381

36. Tene T., Gahramanli L., Muradov M., Mammadova A., Khudaverdiev V., Azizova A., Alakbarova S., Isayeva L., Huseynzade R., Eyvazova G., Hajiyeva F., Bellucci S., Vacacela Gomez C., Akhundzada H. V., Khankishiyeva R., Front. Chem. 13, 1710575 (2026). https://doi.org/10.3389/fchem.2025.1710575

37. Prasertsri S., Saehan E., Nuinu P., Burapha Sci. J. 26, 71–89 (2021). https://doi.org/10.14456/burapha.2021.1

38. Amirli F. A., Khankishiyeva R. F., Mammadova A. F., Dokl. Chem. 520, 129–137 (2025). https://doi.org/10.1134/S0012500825600981

39. Amirli F., Khankishiyeva R., Movlayev I., Mammadova A., Phys. Chem. Solid State 26, 549–555 (2025). https://doi.org/10.15330/pcss.26.3.549-555

40. Amirli F. A., Khankishiyeva R. F., Mammadova A. F., Bayramova S. T., Azizova G. G., Iravanli K. B., Int. J. Biol. Chem. (2025). https://doi.org/10.26577/IJBCh20251829

41. Mammadov S., Mammadova G., Khankishiyeva R., Azizova G., Movlayev I., Mammadov J., Chem. Chem. Technol. 17, 829–835 (2023). https://doi.org/10.23939/chcht17.04.829

42. Amirli F. A., Movlayev I. H., Mammadova A. F., PPOR 24, 229–239 (2025). https://doi.org/10.62972/1726-4685.2025.1.229

43. Mammadov Sh. M., Mammadova G. A., Khankishiyeva R. F., Amirov F. A., Azizova G. G., Movlayev I. G., Mammadov J. Sh., Funct. Mater. 30, 393–399 (2023). http://dx.doi.org/10.15407/fm30.03.393

44. Amirli F. A., Movlayev I. H., Aliyeva G. A., Mammadova A. F., PPOR 24, 689–696 (2023). https://doi.org/10.36719/1726-4685/96/689-696

45. Dorigato A., Fredi G., Adv. Ind. Eng. Polym. Res. 7, 405–427 (2024).

46. Kang H., Bae J., Lee J., Yun Y., Jeon S., Chung N., Jung J., Baek U., Lee J., Kim Y., Polymers 16, 1065 (2024). https://doi.org/10.3390/polym16081065

47. Yan C., Chen B., Li X., He J., Zhao X., Zhu Y., Yang R., Polymers 16, 695 (2024). https://doi.org/10.3390/polym16050695

48. Zheng T., Jia W., Meng H., Li J., Liu X., Polymers 16, 355 (2024). https://doi.org/10.3390/polym16030355

49. Malas A., Das C. K., J. Mater. Sci. 47, 2016–2024 (2012). https://doi.org/10.1007/s10853-011-6000-z

50. Guo M., Li J., Xi K., Liu Y., Ji J., Acta Astronaut. 159, 508–516 (2019). https://doi.org/10.1016/j.actaastro.2019.01.047

51. Hao H., Zhou X., Shen Z., He J., Yang R., J. Appl. Polym. Sci. 137, 48365 (2020). https://doi.org/10.1002/app.48365

52. Rivier M., Lachaud J., Congedo P. M., Aerosp. Sci. Technol. 84, 1059–1069 (2019). https://doi.org/10.1016/j.ast.2018.11.048

53. Qu H., Wang L., Hui K., Bian C., Li H., Guan Y., Luan T., Yan N., Polymers 14, 1570 (2022). https://doi.org/10.3390/polym14081570

54. Natali M., Kenny J. M., Torre L., Prog. Mater. Sci. 84, 192–275 (2016). https://doi.org/10.1016/j.pmatsci.2016.08.003

55. Pandey K. N., Setua D. K., Mathur G. N., Polym. Eng. Sci. 45, 1265–1276 (2005). https://doi.org/10.1002/pen.20396

56. Oliveira M. G., Soares B. G., J. Appl. Polym. Sci. 90, 2408–2414 (2003). https://doi.org/10.1002/app.12891

57. Oliveira M. G., Gomes A. C. O., Almeida M. S. M., Soares B. G., Macromol. Chem. Phys. 205, 465–475 (2004). https://doi.org/10.1002/macp.200300028

58. Manoj K. C., Kumari P., Rajesh C., Unnikrishnan G., J. Polym. Res. 17, 1–9 (2010). https://doi.org/10.1007/s10965-009-9283-x

59. Mayasari H. E., Setyadewi N. M., Yuniari A., J. Appl. Polym. Sci. 135, 46319 (2018). https://doi.org/10.1002/app.46319

60. Song Y. H., Kim H. I., Polymer Korea 46, 94–100 (2022). https://doi.org/10.7317/pk.2022.46.1.94

61. Nathan K. S., Krishnamohan S., Navaneethakrishnan V., Vishvanathperumal S., Mater. Res. Express 11, 115306 (2024). https://doi.org/10.1088/2053-1591/ad9080

62. Akhundzada H. V., Khankishiyeva R., Yardim M. S., Mammadova G., Mammadov A., Azizova A., Salehov A., Isagov U., Salmanov F., J. Thermoplast. Compos. Mater. (2026). https://doi.org/10.1177/08927057261415875

63. Mammadov A. Kh., J. Thermoplast. Compos. Mater. 38(7) (2025). https://doi.org/10.1177/08927057241305535

Current number: