Funct. Mater. 2026; 33 (3): 456-461.

doi:https://doi.org/10.15407/fm33.03.456

Regularities of the structural-phase state formation of the electro-spark coating at the initial stage and the surface layers of the steel substrate

V.E. Danilchenko, V.J. Bondar, Ie.M. Dzevin, V.Ie. Iakovlev

G.V. Kurdyumov Institute for Metal Physics NAS of Ukraine, 03680, Vernadsky blvd., 36, Kyiv, Ukrain

Abstract: 

The regularities of the formation of an electro-spark coating (ESC) and near-surface layers of a steel substrate were investigated by the X-ray method. The microstructure of the coating at the early stage of formation was studied by observing individual areas of the discontinuous coating. The mechanism of mass transfer of individual phase components of the alloying electrode material in the electric discharge channel is analyzed. The possibility of the reverse α→γ (bcc→fcc) transformation in the near-surface layers of the substrate under conditions of upward carbon diffusion was demonstrated.

Keywords: 
electro-spark coating, structural-phase state, diffusion, reversed transformation, carbonitride.
References: 

1. X. Wei , Z. Chen, J. Zhong, Y. Xiang, Feasibility of preparing Mo2FeB2-based cermet coating by electrospark deposition on high speed steel, Surface & Coatings Technology. 296 (2016) 58. http://doi.org/10.1016/j.surfcoat.2016.03.090

2. A.A. Burkov, S.A. Pyachin, M.A. Ermakov, A.V. Syuy, In situ synthesis and characterization of Fe-Based metallic glass coatings by electrospark deposition technique, Journal of Materials Engineering and Performance.26, No 2 (2017) 901. http://doi.org/10.1007/s11665-016-2493-6

3. S.H. Baghjari, F.M. Ghaini, H.R. Shahverdi, C.M. Barella, D. Ripamonti, Materials and Design 107: 108 (2016). http://doi.org/10.1016/j.matdes.2016.06.022

4. R. Yamanoglu, N. Gulsoy, E.A. Olevsky, H.O. Gulsoy, Production of porous Ti5Al2.5Fe alloy via pressureless spark plasma sintering, Journal of Alloys and Compounds. 680 (2016) 654. http://doi.org/10.1016/j.jallcom.2016.04.176

5. K. Soma Raju, N.H. Faisal, D.S. Rao, S.V. Joshi, G. Sundararajan, Electro-spark coatings for enhanced performance of twist drills, Surface & Coatings Technology. 202 (2008) 1636. http://doi.org/10.1016/j.surfcoat.2007.07.084

6. M. Scendo, N. Radek, J. Trela, The influence of electrospark and laser treatment upon corrosive resistance of carbon steel, Advanced Materials Research, 874 (2014) 107. https://doi.org/10.4028/www.scientific.net/AMR.874.107

7. D.W. Heard, J. Boselli, R. Rioja, E.A. Marquis, R. Gauvin, M. Brochu, Interfacial morphology development and solute trapping behavior during rapid solidification of an Al–Li–Cu alloy, Acta. Mater. 61 (2013) 1571. https://doi.org/10.1016/j.actamat.2012.11.034

8. V.I.Bondar, V.E.. Danilchenko, A.V. Filatov, V.F. Mazanko, V.E. Iakovlev, Effect of cyclic martensitic ?–e–? transformations on diffusion characteristics of carbon in an iron–manganese alloy, Prog. Phys. Met., v. 19 (2018) No 1, 70-94. https://doi.org/10.15407/ufm.19.01.070

9. V.S. Kovalenko, A.D. Verhoturov, L.F. Golovko, Laser and electrospark hardening of materials Мoscow: Nauka, 1986.

10. V.Yu. Danilchenko, O.M. Semyrga. The regularities of electrosparc coatings formation on steel substrate, Met. Sci. and Treat. of Met. No 2 (2003) 25 –30.

11. I.V. Kudriavcev, Materials in Mashinbuilding, Мoscow: Mashinostroenie, 1969.

12. V.N. Yeremenko, Multi-Component Titanium Alloys, Kiev: Izd.An.Ussr, 1962.

13. V.A. Andryushchenko, Ye.M. Dzevin, V.F. Mazanko, V.L. Svechnikov, Ascending diffusion in the surface layers of Fe-Al-C alloys during the laser irradiation, Met. Phys. And Tech., 19 (1999) 1235-1243.

Current number: