Funct. Mater. 2026; 33 (3): 417-434.
A review on recent advances in epdm/nbr-based rubber blends: structure, properties, applications and sustainability
1Azerbaijan State Oil and Industry University, Az1010, Azadlig 20, Baku, Azerbaijan
2 Institute of Physics, Ministry of Science and Education of the Republic of Azerbaijan, Baku AZ1143, Azerbaijan
3Azerbaijan University of Architecture and Construction, AZ1073, Baku, Azerbaijan
4Scientific-Research Institute «Geotechnological Problems of Oil, Gas and Chemistry», Baku, Azerbaijan
5Urgench State University, 14, Kh.Alimdjan str, 220100, Urgench city, Uzbekistan.
Ethylene Propylene Diene Monomer (EPDM) and Nitrile Butadiene Rubber (NBR) are two industrially significant elastomers with complementary properties ? EPDM provides excellent resistance to ozone, weathering, and thermal aging, while NBR exhibits superior oil and hydrocarbon resistance. However, their inherent immiscibility due to polarity differences limits direct blending, leading to phase separation and poor interfacial adhesion. This review critically examines recent strategies to enhance the compatibility and performance of EPDM/NBR blends, including chemical compatibilizers such as maleic anhydride grafted EPDM (MAH-g-EPDM), epoxidized EPDM (Ep-EPDM), aminated Ep-EPDM (Am-Ep-EPDM), and bromobutyl rubber (BIIR). Nanofiller incorporation, particularly organo-modified nanoclays, improves morphology control, crosslinking density, thermal stability, and mechanical reinforcement. Fiber reinforcement, especially with short aramid fibers at optimized orientation angles, enhances ablation resistance and char layer integrity for high-temperature applications. The effects of different curing systems (sulfur vs. peroxide) on vulcanization kinetics, network structure, and long-term aging are also discussed. The review summarizes findings from multiple studies to provide a comprehensive understanding of the structure–property relationships, thermal and mechanical performance, and application-specific suitability of EPDM/NBR composites. These multifunctional blends demonstrate significant potential for automotive, aerospace, and industrial applications where a combination of oil resistance, thermal stability and durability is required. Future research directions include eco-friendly compatibilization, advanced nanofillers, digital process control, and sustainable recycling strategies to further enhance performance and eco-compatibility.
1. Ning N., Ma Q., Zhang Y., Zhang L., Wu H., Tian M., Polym. Degrad. Stab. 102, 1–8 (2014). https://doi.org/10.1016/j.polymdegradstab.2014.01.037
2. Botros S. H., Tawfic M. L., Polym.-Plast. Technol. Eng. 44, 209–227 (2005). https://doi.org/10.1081/PTE-200048518
3. Botros S. H., Tawfic M. L., J. Elastomers Plast. 38, 349–365 (2006). https://doi.org/10.1177/0095244306065889
4. Manoj K. C., Unnikrishnan G., J. Appl. Polym. Sci. 105, 908–914 (2007). https://doi.org/10.1002/app.26135
5. Manoj K. C., Prajitha Kumari, Unnikrishnan G., J. Appl. Polym. Sci. 120, 2654–2662 (2011). https://doi.org/10.1002/app.33476
6. Basha S. K. T., Divya R., Menon A. U., Ashok N., Balachandran M., Mater. Today Proc. 5, 23586–23595 (2018). https://doi.org/10.1016/j.matpr.2018.10.147
7. Gao G., Zhang Z., Zheng Y., Jin Z., Polym. Compos. 31, 1223–1231 (2010). https://doi.org/10.1002/pc.20909
8. Oliveira M. G., Gomes A. C. O., Almeida M. S. M., Soares B. G., Macromol. Chem. Phys. 205, 465–475 (2004). https://doi.org/10.1002/macp.200300028
9. Ghassemieh E., Polym. Compos. 30, 1657–1667 (2009). https://doi.org/10.1002/pc.20810
10. Ersali M., Fazeli N., Naderi G., Int. Polym. Process. 27, 187–195 (2012). https://doi.org/10.3139/217.2464
11. Samaržija-Jovanović S., Jovanović V., Marković G., Konstantinović S., Marinović-Cincović M., Compos. B Eng. 42, 1244–1250 (2011). https://doi.org/10.1016/j.compositesb.2011.02.008
12. Jovanović V., Samaržija-Jovanović S., Budinski-Simendić J., Marković G., Marinović-Cincović M., Compos. B Eng. 45, 333–340 (2013). https://doi.org/10.1016/j.compositesb.2012.05.020
13. Hoikkanen M., Poikelispää M., Das A., Honkanen M., Dierkes W., Vuorinen J., Polym.-Plast. Technol. Eng. 54, 402–410 (2015). https://doi.org/10.1080/03602559.2014.958775
14. Mayasari H. E., Setyorini I., Yuniari A., Indones. J. Chem. 19, 106–114 (2019). https://doi.org/10.22146/ijc.27730
15. Mayasari H. E., Setyadewi N. M., AIP Conf. Proc. 2049, 020042 (2018). https://doi.org/10.1063/1.5082447
16. Mayasari H. E., Wirapraja A. Y., Setyorini I., Majalah Kulit Karet dan Plastik 36, 1–8 (2020). https://doi.org/10.20543/mkkp.v36i1.5951
17. Dijkhuis K. A. J., Noordermeer J. W. M., Dierkes W. K., Eur. Polym. J. 45, 3302–3312 (2009). https://doi.org/10.1016/j.eurpolymj.2009.06.029
18. Grigoryeva O., Karger-Kocsis J., Eur. Polym. J. 36, 1419–1427 (2000).
19. Ismail H., Pasbakhsh P., Ahmad Fauzi M. N., Abu Bakar A., Polym. Test. 27, 841–850 (2008).
20. Ismail H., Shaari S. M., Polym. Test. 29, 872–878 (2010).
21. Manjhi S., Sarkhel G., J. Appl. Polym. Sci. 119, 2268–2274 (2011).
22. Mohammadpour Y., Katbab A. A., J. Appl. Polym. Sci. 106, 4209–4218 (2007).
23. Pasbakhsh P., Ismail H., Ahmad Fauzi M. N., Abu Bakar A., Polym. Test. 28, 548–559 (2009).
24. Alipour A., Naderi G., Bakhshandeh G. R., Vali H., Shokoohi S., Int. Polym. Process. 26, 48–55 (2011).
25. Chakrit S., Sauvarop L., Jarunee T., J. Appl. Polym. Sci. 89, 1156–1163 (2003).
26. Hu G., Wang B., Zhou X., Mater. Lett. 58, 3457–3460 (2004).
27. Paran S. M. R., Naderi G., Mirzaee M., Ghoreishy M. H. R., Włoch M., Esmaeili A., Abida O., Saeb M. R., Polym. Bull. 81, 755–772 (2024). https://doi.org/10.1007/s00289-023-04723-7
28. Dhanasekar S., Baskar S., Vishvanathperumal S., J. Inorg. Organomet. Polym. Mater. 33, 3208–3220 (2023). https://doi.org/10.1007/s10904-023-02754-1
29. Sundar R., Mohan S. K., Vishvanathperumal S., Polymer Korea 46, 728–743 (2022). https://doi.org/10.7317/pk.2022.46.6.728
30. Das R. K., Ragupathy K., Kumar T. S., Vishvanathperumal S., Polymer Korea 47, 221–232 (2023). https://doi.org/10.7317/pk.2023.47.2.221
31. Eissa M. M., Botros S. H., Diab M. A., Shafik E. S., Rozik N. N., Clean Technol. Environ. Policy 25, 3203–3218 (2023). https://doi.org/10.1007/s10098-023-02604-1
32. Parthasarathy K., Vishvanathperumal S., Balasubramanian T., Kargil Jove Anirudh R. R., AIP Conf. Proc. 3037, 020044 (2024). https://doi.org/10.1063/5.0196573
33. Egorov E., Turmanov R., Zhapparbergenov R., Oryngaliyev A., Akylbekov N., Appazov N., Loshachenko A., Glukhoedov N., Nakyp A., Semenova N., Polymers 18, 103 (2026). https://doi.org/10.3390/polym18010103
34. Costa N. L., Hiranobe C. T., Cardim H. P., et al., Polymers 16, 1720 (2024). https://doi.org/10.3390/polym16121720
35. Li Z., Chen Z., Sun W., Liu Y., et al., Polymers 16, 2381 (2024). https://doi.org/10.3390/polym16162381
36. Tene T., Gahramanli L., Muradov M., Mammadova A., Khudaverdiev V., Azizova A., Alakbarova S., Isayeva L., Huseynzade R., Eyvazova G., Hajiyeva F., Bellucci S., Vacacela Gomez C., Akhundzada H. V., Khankishiyeva R., Front. Chem. 13, 1710575 (2026). https://doi.org/10.3389/fchem.2025.1710575
37. Prasertsri S., Saehan E., Nuinu P., Burapha Sci. J. 26, 71–89 (2021). https://doi.org/10.14456/burapha.2021.1
38. Amirli F. A., Khankishiyeva R. F., Mammadova A. F., Dokl. Chem. 520, 129–137 (2025). https://doi.org/10.1134/S0012500825600981
39. Amirli F., Khankishiyeva R., Movlayev I., Mammadova A., Phys. Chem. Solid State 26, 549–555 (2025). https://doi.org/10.15330/pcss.26.3.549-555
40. Amirli F. A., Khankishiyeva R. F., Mammadova A. F., Bayramova S. T., Azizova G. G., Iravanli K. B., Int. J. Biol. Chem. (2025). https://doi.org/10.26577/IJBCh20251829
41. Mammadov S., Mammadova G., Khankishiyeva R., Azizova G., Movlayev I., Mammadov J., Chem. Chem. Technol. 17, 829–835 (2023). https://doi.org/10.23939/chcht17.04.829
42. Amirli F. A., Movlayev I. H., Mammadova A. F., PPOR 24, 229–239 (2025). https://doi.org/10.62972/1726-4685.2025.1.229
43. Mammadov Sh. M., Mammadova G. A., Khankishiyeva R. F., Amirov F. A., Azizova G. G., Movlayev I. G., Mammadov J. Sh., Funct. Mater. 30, 393–399 (2023). http://dx.doi.org/10.15407/fm30.03.393
44. Amirli F. A., Movlayev I. H., Aliyeva G. A., Mammadova A. F., PPOR 24, 689–696 (2023). https://doi.org/10.36719/1726-4685/96/689-696
45. Dorigato A., Fredi G., Adv. Ind. Eng. Polym. Res. 7, 405–427 (2024).
46. Kang H., Bae J., Lee J., Yun Y., Jeon S., Chung N., Jung J., Baek U., Lee J., Kim Y., Polymers 16, 1065 (2024). https://doi.org/10.3390/polym16081065
47. Yan C., Chen B., Li X., He J., Zhao X., Zhu Y., Yang R., Polymers 16, 695 (2024). https://doi.org/10.3390/polym16050695
48. Zheng T., Jia W., Meng H., Li J., Liu X., Polymers 16, 355 (2024). https://doi.org/10.3390/polym16030355
49. Malas A., Das C. K., J. Mater. Sci. 47, 2016–2024 (2012). https://doi.org/10.1007/s10853-011-6000-z
50. Guo M., Li J., Xi K., Liu Y., Ji J., Acta Astronaut. 159, 508–516 (2019). https://doi.org/10.1016/j.actaastro.2019.01.047
51. Hao H., Zhou X., Shen Z., He J., Yang R., J. Appl. Polym. Sci. 137, 48365 (2020). https://doi.org/10.1002/app.48365
52. Rivier M., Lachaud J., Congedo P. M., Aerosp. Sci. Technol. 84, 1059–1069 (2019). https://doi.org/10.1016/j.ast.2018.11.048
53. Qu H., Wang L., Hui K., Bian C., Li H., Guan Y., Luan T., Yan N., Polymers 14, 1570 (2022). https://doi.org/10.3390/polym14081570
54. Natali M., Kenny J. M., Torre L., Prog. Mater. Sci. 84, 192–275 (2016). https://doi.org/10.1016/j.pmatsci.2016.08.003
55. Pandey K. N., Setua D. K., Mathur G. N., Polym. Eng. Sci. 45, 1265–1276 (2005). https://doi.org/10.1002/pen.20396
56. Oliveira M. G., Soares B. G., J. Appl. Polym. Sci. 90, 2408–2414 (2003). https://doi.org/10.1002/app.12891
57. Oliveira M. G., Gomes A. C. O., Almeida M. S. M., Soares B. G., Macromol. Chem. Phys. 205, 465–475 (2004). https://doi.org/10.1002/macp.200300028
58. Manoj K. C., Kumari P., Rajesh C., Unnikrishnan G., J. Polym. Res. 17, 1–9 (2010). https://doi.org/10.1007/s10965-009-9283-x
59. Mayasari H. E., Setyadewi N. M., Yuniari A., J. Appl. Polym. Sci. 135, 46319 (2018). https://doi.org/10.1002/app.46319
60. Song Y. H., Kim H. I., Polymer Korea 46, 94–100 (2022). https://doi.org/10.7317/pk.2022.46.1.94
61. Nathan K. S., Krishnamohan S., Navaneethakrishnan V., Vishvanathperumal S., Mater. Res. Express 11, 115306 (2024). https://doi.org/10.1088/2053-1591/ad9080
62. Akhundzada H. V., Khankishiyeva R., Yardim M. S., Mammadova G., Mammadov A., Azizova A., Salehov A., Isagov U., Salmanov F., J. Thermoplast. Compos. Mater. (2026). https://doi.org/10.1177/08927057261415875
63. Mammadov A. Kh., J. Thermoplast. Compos. Mater. 38(7) (2025). https://doi.org/10.1177/08927057241305535