Funct. Mater. 2026; 33 (3): 583-589.

doi:https://doi.org/10.15407/fm33.03.583

Detection and research of solids emission properties using the modulation polarimetry technique

I. Matyash, I. Minailova, B. Serdega, O. Mishchuk

Lashkaryov Institute of Semiconductor Physics of the National Academy of Sciences of Ukraine, pr. Nauki 41, 03028 Kyiv, Ukraine

Abstract: 

The optical polarization technique (modulation polarimetry) was used to rapidly determine and analyze the emission properties of solids in which mechanical stresses arise during the contactless interaction of bodies with different emissivity coefficients at an identical system temperature. This method is a modern optical measurement approach that enables highly sensitive detection of anisotropic and polarization-dependent optical properties of materials. The materials investigated in this study (glass, silicon, aluminum, etc.) were selected due to their widespread use in thermal physics and materials science, as well as the significant differences in their emissivity and related parameters.Mechanical stresses and the characteristic heat-transfer time in solids were experimentally determined. It was further established that the characteristic heat-transfer time and the thermal conductivity coefficient are inversely related (f=c(t)), whereas mechanical stresses and emissivity are related by an exponential dependence (f=σ(ε)). Thus, this technique offers a rapid and effective method for determining the thermal conductivity and emissivity of solid materials. These capabilities are of considerable practical importance for technological and engineering calculations of radiative heat exchange between different materials (glass, metals, composites, synthetic and biological materials), including those containing internal defects and inclusions.

Keywords: 
optical polarization method, thermoelasticity, emissivity coefficient, thermal conductivity coefficient.
References: 

1. H. L.Hackforth, Infrared Radiation, McGraw-Hill, New York, 1960.

2. G. Graybill,Energy: Thermal Energy,Classroom Complete Press, 2013.

3. M.Nikbakht, Radiative heat transfer in anisotropic many-body systems: Tuning and enhancement,J. App. Phys.116(2014), 094307.https://doi.org 10.1063/1.4894622.

4. R. Messina, M. Antezza, P. Ben-Abdallah, Three-body amplification photon heat tunneling, Phys. Rev. Lett. 109(2012),244302. https://doi.org/10.1103/PhysRevLett.109.244302.

5. O. Huth, F. Rting, S.-A. Biehs, M. Holthaus, Shape-dependence of near-field heat transfer between a spheroidal nanoparticle and a flat surface, Eur. Phys. J. Appl. Phys.50(2010), 10603. https://doi.org/10.1051/epjap/2010027.

6. P. Ben-Abdallahet, Heat superdiffusion in plasmonic nanostructure networks, Phys. Rev. Lett. 111(2013), 17430.https://doi.org/10.1103/PhysRevLett.111.174301.

7. I. E. Matyash, I. A. Minailova, B. K. Serdega, I. S. Babichuk, Research of optical and mechanical properties of lithium aluminosilicate glass-ceramics, J. Non-Crys. Sol. 459(2017),94. https://doi.org/10.1016/j.jnoncrysol.2016.12.039.

8. I.Matyash, I.Minailova, A.Minailov,O.Mischuk, B.Serdega, Detection and research of radiative adiabatic interaction by modulation polarimetry,Optik. 265(2022), 169437.https://doi.org/10.1016/j.ijleo.2022.169437.

9. R.Siegel, J.R. Howell, Thermal Radiation Heat Transfer, Taylor and Francis,New York, 2002.

10. I.Minailova, I.Matyash, B.Serdegaet. al, Thermoelasticity component analysis in glasses during radiation cooling, 2017 IEEE International Young Scientists Forum on Applied Physics and Engineering, YSF 20172017, 84-87.https://doi.org/10.1109/YSF.2017.8126656.

Current number: